Defination of cisco ccnp boot camp

Headlines on cisco ccnp boot camp

new dynamips version 0.2.8-RC2

Wed, 23 Apr 2008 09:22:19 +0000
Thanks very much to the author Chris (Christophe Filot) for dynamips. Which is very helpfull preparing for the lab.
Mostly bugfixes, but also now with ISL trunking support.
GNS3 is also a nice tool for drag and drop a topology with the needed devices and IOS versions. It`a still a little bugy sometime, but if ...]

sh ppp multilink

Cisco Extended Functions - redundancy

Sat, 15 Jul 2006 00:36:02 +0000
When multiple Cisco Extended Functions are active within a Cisco CallManager cluster, the redundancy manager uses an algorithm to determine which Cisco Extended Functions service is active and which is the backup CEF. The Redundancy Manager uses the lowest IP address of the server that is running the CEF service as the active servicne. The remaining CEF ...]

How to put an IP address on an Ethernet interface

Mon, 25 Aug 2008 21:19:28 +0000
There are 4 easy steps to accomplish this task.  Remember that you will always need to access the global configuration mode to add interfaces. Let’s walk through these steps together.
First you should connect to your router. You would do this with the enable command.
router> enable            enter
Now we need to access the configurator to use the ...]

“Variance” - Understanding The Balancing Act

Wed, 17 Sep 2008 21:50:20 +0000
This is an extract from a comment left by a visitor to a previous post on this blog:



“i was going through the bsci section and found about load balancing …

i set up a network in gns3 and tested loadbalancing with bandwidth and variance command
what exactly is the difference between those two ? both ...]


ccie rack
cisco ccnp track | cisco ccnp training | cisco ccnp video